Rod Circle table leg 90 diameter 74 h

The table leg model you are examining consists of 7 mm transmission metal rods. It is a table leg model consisting of approximately 70 pieces of 7 mm transmission rods combined with four thicker solid metal rods with quality workmanship. There are four circular hoops used in the table leg and a solid and clean welding workmanship is applied at each intersection with the rod. After the table leg is produced as raw, 4 to 8 rods are produced according to the diameter of the table leg, which will touch the table to be used, and the height is adjusted from the ground to be produced in a way that they will touch the table to be used at the same time. If a glass table is to be connected, vacuum transparent rubbers are placed on these parts to hold the glass table and prevent it from slipping.

The points where the table leg touches the floor are not seen in the picture, but plastic u-section shoes are sent with the table leg. It can be produced in many different colors. It is coated with oven paint.