Armless triple metal waiting chair (Orange Leather)

This sofa set, which we designed for those who want to use the reflection of the elegance of metal and leather in the waiting chair, prioritizes your comfort with its seat and back details. It is a comfortable waiting chair with soft platforms placed in the seating and back area. It is one of the most preferred products in waiting rooms and you can design the upholstery colors according to your wishes. In this way, you can provide the most suitable decoration for your space.

Specification of triple waiting chair with sheet metal

1- Width (depth) should be at least 63 – 65 cm, length should be at least 145 cm, height (font/back) should be at least 45/84 cm.

2- The body of the session should consist of at least 1.5 mm plate sheet metal shaped parts in laser, at least 25X2 mm ellipse pipe and binding parts. Sheet metal plugs should be used at the ends of ellipse pipes

3- The parts are welded together and joined together

4-A profiled traverse with dimensions of at least 40x60x1.50 mm should be used to connect the session bodies. The two ends of the sleepers are covered with hair. The foot profile will be made of 40X40X1.20 Profile.

5-The hair that makes up the font and back areas should be shaped in special molds and perforated holes should be available.

6-All metal parts should be powder coated.

7-Flooring; Sponge should be covered on the counter in the back and font areas.

8-It should be upholstered in artificial leather. The artificial leather to be used in upholstery must have at least the following features.

a) Weight at least 540-550 gr/m2

b) Textile 100% polyester cloth

c) Composition 10% polyurethane, 90% pvc

d) Pile abrasion, wet and dry rubbing fastness at least 5

e) Weft tensile strength at least 445

f) Warp breaking strength at least 275

g) Weft tear strength at least 65

h) Seam strength at least 5

ı) It should be damp and can be wiped with a soapy cloth

j) There must be a document showing that the above features have been tested.

9- Legs should be 40X40X1.20 profile legs manufactured in special molds.

10- Feet should be fixed by welding. 13- Feet should be powder coated.

11- Plastic pingos with moving heads should be used on the tips of the feet.