12 Volt 30 Ampere Fully Regulated Switch Mode Metal Case Adapter

12 Volt 30 Ampere Metal Case Fan Adapter Features

• Input Voltage: 220 Volts
• Output Voltage: 12 Volts
• Output Power: 360 Watts
• Output Power Ampere: 30 Ampere
• Efficiency (tolerance): 85%
• IP : IP20 (indoor)
• Case: Metal Wide Case with Fan
• Current Protection : + Yes
• Short Circuit Protection : + Yes
• Product Dimensions: 110 x 220 x 45 cm
• Working Frequency: 40-60 Hz
• Working Ambient Temperature: -30 degrees to +40 degrees
• Storage Ambient Temperature: -20 degrees to +80 degrees
• Safety standard: EN60950-1 UL60950-1 ESD (EN61000 3-3) CAS (60950 ITE/TE) FCC Part 15 subpart B Class B AN/NZS CISPR 22:2006
• Standards: CE, FC, TUV, GS, UL, FC, CCC
• Fan : Where

12 Volt 30 Ampere Metal Case Fan Adapter Usage

Transformer input is 220 volts output is 12 volts.
If 220V is given to 12V output, adapter IC will burn and become unusable.
This situation voids the product warranty. You should be careful not to make reverse connection.

If two or more adapters are to be used, the distance between the two transformers must be at least 1 meter to avoid magnetic interference.
12 Volt 30 Ampere Metal Case Fan Adapter should not be used in places with no air.
You should operate the product in a ventilated environment for it to work more efficiently and cool itself.

The 20 Amp Fan Adapter should not be exposed to liquid dripping or splashing.
The cable between the product used in the 12 Volt output (such as LED, small motor, any kind of lighting product) and the transformer should be as short as possible.
The adapter must be connected to the ground. Grounding will extend the life of the adapter and provide better performance.
Technically, as the cable gets longer, it will show resistance and the output power will decrease towards the end of the cable. The maximum operating environment for
the 12V 30 Amp Fan Adapter  is 40 ℃.

What is the use of Fan in 12V 30 Ampere Adapter?

As long as the adapters are working, heat is generated. The integrated circuit of the adapter that works for a long time heats up.
In order to discharge the heat, a fan is needed inside the adapter. The adapter allows the heat inside to be discharged to the outside, thus the temperature inside drops to the operating temperature.
The height of the heat generated increases according to the power of the adapter (ampere value). Therefore, it should be noted that there is a fan, especially in 30 and 30 Ampere adapters.

12 Volt Metal Case Fan Adapter Usage areas

Many electronic products today operate on 12V energy.
The mains electricity in homes and most workplaces is 220 Volts. Adapters are needed to reduce this energy.
12V adapters are needed for products such as the lighting sector, camera systems, aquarium equipment, small household appliances, and chargers.

Main products where 12V Metal Case Fan Adapter is used:

• Module LEDs
• Strip LEDs
• Neon Lighting
• Security cameras and recording devices
• Aquarium engines
• Mini cooling fans
• Cordless hand tools
• Furniture lighting
• Elevator and cabin interior lighting

12 Volt 30 Ampere Metal Case Fan Adapter Dimensions